The HPA V280-FE was developed with the aim of ensuring the highest transmission quality on low-, medium- and high-impedance headphones. These can also be symmetrical! Like its “big brother” (HPA V281), the HPA V280 also uses our acclaimed V200 amplifier technology for a neutral but still unusually warm playback.
– Input selector on rear panel for RCA or XLR
– 4 power amplifiers with V200 technology
– 1 sym. Headphone jack, 4-pin XLR
– 2 unsym. Headphone connections – lowest noise
– Highest output voltage (60 Volt internal operating voltage)
– Strongest output (best suited for low-impedance headphones – also magnetostats)
– Highest damping factor
– Pre-gain (5-fold pre-amplification)
– Channel-separated structure
– DC coupled (can be switched off)
– ALPS RK27 high-grade volume control
– High quality OpAmps in the signal path
– ALPS RK27 high grade balance regulator
– High quality MKP capacitors in the signal path
– 0.1% and 1% metal film resistors throughout the device
– Discretely constructed power amplifiers with 8 transistors per channel
– 2 headphone jacks, Neutrik, silver plated
– Delayed connection / disconnection of the headphone connections via relay
– Two toroidal transformer
– High sieve capacity in the power supply
– Ground lift switchable
Optionally 6 different digital inputs are available:
Coaxial, Optical or USB with up to 96 kHz or 192 kHz Sample rate.
The HPA V280 can be equipped with one of 6 different digital inputs:
Coaxial, Optical or USB with up to 96 kHz or 192 kHz Sample rate
Features
- Balanced inputs via XLR, Neutrik, gold-plated
- Unbalanced inputs via cinch, ALPS, gold-plated
- Unbalanced outputs via cinch, ALPS, gold-plated
- Optional digital input 2 headphone jacks, Neutrik, silver plated
- 1 headphone jack, Neutrik, 4-pin XLR, gold-plated
- Discrete output stages with 16 transistors per channel
- High quality MKP capacitors in the signal path
- High quality OpAmps in the signal path
- ALPS RK27 high-grade volume control ALPS RK27
- High grade balance regulator delayed connection of the headphone connections via relay
| In-/Output: | 2 / 0 channel (sym. XLR), 2 / 2 channel (unsym. RCA) |
| Headphone output: | 1 (sym., XLR 4-Pol), 2 |
Amplifier channels: | 4 |
Frequency response: | 0 Hz – 60 kHz (-0,5 dB) |
| Input sensitivity: | +6 dBu |
Input impedance: | 10 kOhm |
Output impedance: | 0,165 Ohm (unsym.) |
max. input level | +21 dBu |
max. output level: | 1800 mW (600 Ohm) _ 5300 mW (100 Ohm) _ 3100 mW (50 Ohm) _ 2600 mW (32 Ohm) _ 1500 mW (16 Ohm) |
| Noise ratio (SNR): | >129 dB (A-wt.) |
THD+N (@ -1 dBFs) | < -102 dB / < 0.0008 % |
| Crosstalk: | -115 dB |
| Extras: | optional digital input available |
| Power supply: | 230 V / 115 V AC |
| Casing: | desktop |
| Dimensions | 170 x 49 x 320 mm (WxHxD) |
Color: | Black |














